Need Green Pad Quick Fix.

[tridentgum0]

It doesn't pick up at all in freestyle and maybe one of ten in song. RB2 kit. Suggestions?

[XBoSsS]

Remove the pad from the kit with a butterknife or a screwdriver by prying gently under it. It holds in place by 4 plastic pegs thru rubber grommets ( you can see them from under). Take a look at the wire under if it's connected, dented, broken or if the sensor still stuck to the pad. **** happens :rolleyes:

[de Rookie]

Also, check the connection close to the side of the drum interior (left side on the green pad) once you have the pad off. The factory soldering job is rubbish. I had to re-solder my red pad.

While you're in there, you might as well do the penny/foil mod to the sensor as well.