View Full Version : How temporarily rivive a non-responsive drum pad.
DWDrummer121
12-14-2007, 04:58 AM
I searched the forum for a topic about this and didn't come up with anything, so, I don't think this is old, but if it is, please let me know.
So, I was playing expert score duel drums on LIVE when I ran into this guy that told me that he already sent his drum kit in due to unresponsive pads, just like the kit I'm using now. (I have 2 RB bundles, each different products from the 2 differnt factories, so, one works, or worked because the yellow and blue pads cracked, and the other is the one with not-as-responsive pads, which is what I'm using now.) So, he was telling me that as a temporary revival method of the pads, he stuck the pieces of cardboard that came wedged into the pads back into the pads and they worked, yet, he still had to get it replaced, which is obvious. So, I thought I'd try the same thing. So, I went to find the pieces, but I threw them out when I opened it, so I used these other random pieces that I found in the boxes, folded them in half to be thicker, forced them in my pads and EU-freakin'-REKA, the snare pad works perfectly, and so do the others. I don't know why they work because of the cardboard, but it does and I really don't care why. Maybe because it's looser 'cause my other drumkit's snare works better and they're all loose, so, that may be the reason.
But, I thought I'd let you guys know this just in case you don't know yet. Thanks guys!
Delmonte
12-14-2007, 04:10 PM
Looser? If you jam cardboard in there, it would be less play in the head and thus tighter. This is the same concept as taping down the head to there is less play, which has been the only suggestion I've seen that actually works (or at least maes the pads work better).
I wonder if they're ever gonna fix this? I'm about to order my 4th set! Please HMX, make the red and green pads work as well as the yellow and blue ones. Please?
DWDrummer121
12-14-2007, 08:56 PM
Well, yeah, really it makes the pad tighter, but it gives the sensor underneath some breathing room. Apparently, when the sensor was welded to the drum kit in production, it welded up little balls of plastic right on the sensor, which would create tension between the pad and the base of the drums when hit upon, and the more it's hit upon, the more the sensor is damaged by the tension. So, by sticking cardboard about halfway into the pad, the pad and the base are separated, preventing any damage to the sensor and leaving the connector wire inside hanging so that it won't ever get unplugged.:D This is all based on what I took away from a post that was posted here before, a very educated guess.:D
Twisted Zen
12-15-2007, 01:36 AM
One thing I found to work pretty well was put a pencil eraser inside the sensor on top of the spring. See below...
drum pad _________________________
black rubber cap ____
Pencil eraser [-]
Spring z
Retaining clip |___|
Sorry no pics I forgot before I returned it. It made the drums work untill the replacment arrived.
Powered by vBulletin™ Version 4.0.7 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.