boxrocker
07-01-2008, 07:06 PM
We bought a blockhead set a few weeks ago about about 15 minutes ago it stopped working. I put the original pedal on and it worked fine.
So I figured either a sensor was bad or something inside broke.
First, I removed two of the three screws under the pad that you can see on the top.
Second, I saw that the black ground wire had disconnected (great job Blockhead... the wire was barely long enough and tiny gauge at that).
Next I soldered the wire back in place, screwed it back together and tested.
Works like a champ but it may come loose again. I'll probably solder a new wire in there to give it some slack. So heads up you blockhead users.
So I figured either a sensor was bad or something inside broke.
First, I removed two of the three screws under the pad that you can see on the top.
Second, I saw that the black ground wire had disconnected (great job Blockhead... the wire was barely long enough and tiny gauge at that).
Next I soldered the wire back in place, screwed it back together and tested.
Works like a champ but it may come loose again. I'll probably solder a new wire in there to give it some slack. So heads up you blockhead users.
